Home > Bag Accessories > Pull Out Handle Cap
Sort By:
Page of 1
Telescope cap Pull out handle plastic cap repair kit

This kit include a plastic cap for the handle and two screws to assemble the cap.

These two issues can be easily fixed by replacing the cap or screws. The screws we recommend #6 x 5/8" (16 mm) sheet metal screws. You can find the #6 sheet metal screws at Home Depot store. We have the plastic cap in stock, order if you need it.
If the pull out handle won't work, the plastic cap of the retractable handle might get broken, the screws might fall off. These two issues can be easily fixed by replacing the cap or screws. The screws we recommend #6 x 5/8" (16 mm) sheet metal screws. You can find the #6 sheet metal screws at Home Depot store. We have the plastic cap in stock, order if you need it.

There are two screws at the bottom end of the cap. The cap is fastened by these two screws to the tracks.

The steel sticks are used to press the hinge of the trolley system to release the handle tracks.

Please make sure the tips of sticks sit in the "Steel stick well" on the cap before you assemble the cap back.
We recommend fill the steel stick wells with a square inch of kitchen food wrap film before you assemble the system.

After secure both sticks in plastic wells, mount the cap back to the tracks again. Make sure the screw holes on the plastic cap and track align up well. Tighten the cap and track using the #6 x 5/8" sheet metal screws gently.

Handle Cap order: Cap and two sheet metal screws.

Our Price: $6.99